Fèy kwiv
Pwodwi Entwodiksyon
Fèy an kwiv ki baze sou elektwolitik kwiv, zenk ak eleman tras kòm materyèl anvan tout koreksyon li yo, nan pwosesis pa lengot, woule cho, woule frèt, tretman chalè, netwayaj sifas, koupe, fini, ak Lè sa a, anbalaj. Pwosesis materyèl pèfòmans, plastisit, pwopriyete mekanik, rezistans korozyon, pèfòmans ak bon fèblan. Li te lajman itilize nan elektrik, otomobil, kominikasyon, pyès ki nan konpitè, dekorasyon ak lòt endistri yo
Prensipal paramèt teknik
2-1chimik konpozisyon
| Non | Alloy No. | Konpozisyon chimik (%, Max.) | ||||||||
| Cu | Fe | Pb | Al | Mn | Sn | Ni | Zn | Salte | ||
| Leton | H96 | 95.0-97.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 |
| H90 | 88.0-91.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H85 | 84.0-86.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H70 | 68.5-71.5 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H68 | 67.0-70.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H65 | 63.5-68.0 | 0.10 | 0.03 | --- | --- | --- | 0.5 | Rem | 0.3 | |
| H63 | 62.0-65.0 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 | |
| H62 | 60.5-63.5 | 0.15 | 0.08 | --- | --- | --- | 0.5 | Rem | 0.5 | |
2-2 tab alyaj
| Non | Pòslèn | ISO | Astm | JIS |
| Leton | H96 | Cuzn5 | C21000 | C2100 |
| H90 | Cuzn10 | C22000 | C2200 | |
| H85 | Cuzn15 | C23000 | C2300 | |
| H70 | Cuzn30 | C26000 | C2600 | |
| H68 | --- | --- | --- | |
| H65 | Cuzn35 | C27000 | C2700 | |
| H63 | Cuzn37 | C27200 | C2720 | |
| H62 | Cuzn40 | C28000 | C2800 |
2-3 Karakteristik
2-3-1Inite spesifikasyon: MM
| Non | Alloy No. (Lachin) | Tanperaman | Tay(mm) | ||
| Epesè | Lajè | Longè | |||
| Leton | H59 H62 H63 H65 H68 H70 | R | 4 ～ 8 | 600 ～ 1000 | ≤3000 |
| H62 H65 H68 | Y y2 | 0.2 ～ 0.49 | 600 | 1000 ～ 2000 | |
| 0.5 ～ 3.0 | 600 ～ 1000 | 1000 ～ 3000 | |||
Mak tanperaman: o. Mou; 1/4h. 1/4 difisil; 1/2h. 1/2 difisil; h. Difisil; eh. Ultrahard; r. Cho woule.
2-3-2 Inite tolerans: MM
| Epesè | Lajè | |||||
| Epesè pèmèt devyasyon ± | Lajè pèmèt devyasyon ± | |||||
| ＜ 400 | ＜ 600 | ＜ 1000 | ＜ 400 | ＜ 600 | ＜ 1000 | |
| 0.5 ~ 0.8 | 0.035 | 0.050 | 0.080 | 0.3 | 0.3 | 1.5 |
| 0.8 ~ 1.2 | 0.040 | 0.060 | 0.090 | 0.3 | 0.5 | 1.5 |
| 1.2 ~ 2.0 | 0.050 | 0.080 | 0.100 | 0.3 | 0.5 | 2.5 |
| 2.0 ~ 3.2 | 0.060 | 0.100 | 0.120 | 0.5 | 0.5 | 2.5 |
| Tanperaman | Fòs rupture N/mm2 | Elongasyon ≥% | Rez nan HV | |
| M | (O) | ≥290 | 35 | --- |
| Y4 | (1/4h) | 325-410 | 30 | 75-125 |
| Y2 | (1/2h) | 340-470 | 20 | 85-145 |
| Y | (H) | 390-630 | 10 | 105-175 |
| T | (Eh) | ≥490 | 2.5 | ≥145 |
| R | --- | --- | --- | |
Mak tanperaman: m. Mou; y4. 1/4 difisil; y2. Difisil; y. Difisil; t. Ultra difisil.
Teknik Faktori
